Grease Bicycle Hub Bearings

In this post a recommendation for bicycle bearings grease will be given.

Grease bicycle hub bearings. The bike wheel bearings reduce friction in the front and rear wheel hubs enabling the wheels to spin more freely and allow for a smoother ride. Spread a light coating of grease on the outside and inside of the new bearings on the inside of the hub shell and on the axle. The bits that keep your bike rolling. If you don t want to read the full article below we consider white lightning crystal grease to be the best bike grease for bearings.

Some swear by the old axle grease that my grandfather father used others recommend silicone teflon graphite grease and so on. The best grease that i know of for this purpose is phil wood bicycle grease available at well stocked bicycle shops. What is the best bicycle bearing grease. Bicycle bearing greases explained the mentioned linked post gives explanation why by author s experience.

To find out if they need greasing without taking everything apart simply remove the wheel from the bike support the axle horizontally with your fingers and turn the wheel slowly try not to tilt the axle as it rotates. Lubricate pack a generous amount of grease into the well that holds the. Degreaser to clean the bearings and races grease a tool to get the bearings out a container to keep the bearings in whilst you clean the hub take care not to use degreaser in the rear hub as you. For detailed explanation of various types of greases as well as recommendation of grease for extreme riding conditions look at this long post.

This article was updated on 12 20 2019 to help you gear up for the 2020 season. Although most cyclists don t give much thought into what kind of bike bearing grease they need putting the wrong grease in the wrong spot can reduce performances and even cause. The wheel bearings sit between a cone screwed to the wheel axle and the cup in the wheel hub. This is a fairly thick grease which makes for easier assembly because it holds the bearing balls in place while you are installing the axle and cones.

If you try spinning your bike wheels and find out that they don t turn smoothly or feels rough. If the grease is too thick between the bearing and the hub. If the bearings are rusty damaged or misshapen you can replace them with new bearings purchased from a bike shop. This grease also is very long lasting and water resistant.

They must be properly adjusted and greased.